HP Series Pure Sine Wave Inverter & MPPT & Charger
HP-PV Series Pure Sine Wave Inverter is a combination of an inverter, charger, solar power and Auto-transfer switch into one complete system . It is packed with unique features and it is one of the most advanced inverter/chargers in the market today.
- Feature of HP Series Inverter & MPPT & Charger
- v Smart Remote Control (RMT)
- v Battery Temperature Sensor (BTS)
- v Automatic Generator Starting (AGS)
- v Support Solar Panel with MPPT Function
- v Designed to Operate under Harsh Environment
- v DC Start & Automatic Self-Diagnostic Function
- v Compatible with Both Linear & Non-Linear Load
- v Easy to Install & Easy to Operate & Easy to Solve
- v Low DC Voltage Supports Home & Office Appliances
- v Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
- v High Efficiency Design & “Power Saving Mode” to Conserve Energy
- v Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
- v 13 Vdc Battery Recover Point, Dedicated for Renewable Energy Systems
- v 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
- v 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
- v 8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity
- v 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
Electrical Specifications Inverter Output Model 1KW 1.5 KW 2KW 3.KW 4KW 5KW 6KW 8KW 10KW 12KW Continuous Output Power 1KW 1.5 KW 2KW 3KW 4KW 5KW 6KW 8KW 10KW 12KW Surge Rating (20Secs) 3KW 4.5 KW 6KW 9KW 12KW 15KW 18KW 24KW 30KW 36KW Output Waveform Pure Sine wave/Same as input(Bypass Mode) Nominal Efficiency >88%(Peak) Line Mode Efficiency >95% Power Factor 0.9-1.0 Nominal Output Voltage rms 100-110-120Vac / 220-230-240Vac Output Voltage Regulation ±10% RMS Output Frequency 50Hz ± 0.3Hz/60Hz ± 0.3Hz Short Circuit Protection Yes( 1sec after fault ) Typical transfer Time 10ms(Max) THD < 10% DC Input Nominal Input Voltage 12.0Vdc/24.0Vdc/48.0Vdc 24.0Vdc/ 48.0Vdc 48.0Vdc Minimum Start Voltage 10.0Vdc/ 10.5Vdc for 12Vdc Mode *2 for 24Vdc, *4 for 48Vdc ; Low Battery Alarm 10.5Vdc/ 11.0Vdc for 12Vdc Mode Low Battery Trip 10.0Vdc/ 10.5Vdc for 12Vdc Mode High Voltage Alarm 16.0Vdc for 12Vdc Mode Low Battery Voltage Recover 15.5Vdc for 12Vdc Mode Idle Consumption-Search Mode < 25 W when Power Saver On. Charger Output Voltage Depends on battery type Charger Breaker Rating 20A 20A 20A 25A 32A 40A 40A 50A 80A 80A Max Charge Power Rate 1/3 Rating Power Battery Initial Voltage for Start 10-15.7Vdc for 12Vdc Mode *2 for 24Vdc, *4 for 48Vdc ; Over Charge Protection Shutdown 15.7Vdc for 12Vdc Mode BTS Battery Temperature Sensor (Optional) Yes Variances in Charging Voltage & S.D Voltage Based on the Battery Temperature.
Bypass & Protection Input Voltage Waveform Sine wave (Grid or Generator) Nominal Voltage 100-110-120Vac / 220-230-240Vac Max Input AC Voltage 150VAC For 120Vac LV Mode; 300VAC For 230Vac HV Mode; Nominal Input Frequency 50Hz or 60Hz (Auto detect) Low Freq Trip 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz High Freq Trip 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Overload protection (SMPS load) Circuit Breaker Output Short circuit protection Circuit Breaker Bypass Breaker Rating 20A 20A 20A 25A 32A 40A 40A 50A 80A 80A Transfer switch Rating 30Amp for UL & TUV 40Amp for UL 80Amp for UL Bypass Without Battery Connected Yes (Optional) Max Bypass Current 30Amp 40Amp 80Amp Solar Charger (Optional) Rated Voltage 12Vdc / 24Vdc / 48Vdc Solar Input Voltage Range 15-45Vdc / 30-70Vdc / 60-100Vdc Rated Charge Current 40 or 60A Rated Output Current 15A Self Consumption < 10mA Bulk Charge (Default) 14.5Vdc for 12Vdc Mode *2 for 24Vdc, *4 for 48Vdc Floating Charge(Default) 13.5Vdc for 12Vdc Mode Equalization Charge(Default) 14.0Vdc for 12Vdc Mode Over Charge Disconnection 14.8Vdc for 12Vdc Mode Over Charge Recovery 13.6Vdc for 12Vdc Mode Over Discharge Disconnection 10.8Vdc for 12Vdc Mode Over Discharge Reconnection 12.3Vdc for 12Vdc Mode Temperature Compensation -13.2mV/°C for 12Vdc Mode Ambient Temperature 0 ~ 40°C(Full load) 40 ~ 60°C(Derating) Mechanical Speccifications Mounting Wall Mount Inverter Dimensions (L*W*H) 388*415*200mm 488*415*200mm 588*415*200mm Inverter Weight (Solar Chg) KG 21 +2.5 22 +2.5 23 +2.5 27 +2.5 38 +2.5 48 +2.5 49 +2.5 60 +2.5 66 +2.5 70 +2.5 Shipping Dimensions (L*W*H) 550*520*310mm 650*520*310mm 750*520*310mm Shipping Weight (Solar Chg)KG 23 +2.5 24 +2.5 25 +2.5 29 +2.5 40 +2.5 50 +2.5 51 +2.5 62 +2.5 68 +2.5 72 +2.5 Display Status LEDs / Status LEDs+LCD Standard Warranty 1 Year Note: Specifications subject to change without notice.
-
Different Series Inverter Selection Guide

YueQing YIYEN Electric Technology Co., Ltd is a professional manufacturer on Voltage Stabilizer, Inverter and UPS.
- Located in Liushi, WenZhou, which is a capital of electrical in China;
- We have been in Power industry for more than 7 years;
- Good quality ,Reasonable price;
- Accepted Retail if we have product in stock;
- Accepted Wholesale,Brand Agents,OEM,ODM and Can be Customized;
- Accepted Payment Type: T/T, PayPal, Western Union;
If you would like a quotation or further info on our product, please fill the form and submit, we will reply to you within 1 working day.
