♦ On Inverter
• High overload ability up to 300% rated power(20 sec.).
• Low quiescent current, power saver mode
♦ On Battery Charger
• 3- step intelligent battery charging
• Uses PFC(power factor correction) for charger
♦ On Transfer
• 10ms typical transfer time
• 15s delay before transfer when AC resumes
♦ Option
• Battery/AC priority switch Available for off grid solar/wind system
• Auto Generator Starter
• Remote Control
• Battery Temperature SensorFeature of PSW7 Series Inverter&Charger
♦ High overload ability of our PSW7 charger is up to 300% rated power(20 sec)♦ PSW7 pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max.
power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).♦ Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.
♦ It has 15s delay before transfer when AC resumes, and overload protection when our PSW7 pure sine wave inverter equips with generator.
♦ 10ms typical transfer time between battery and AC, which guarantees power continuity of PSW7 charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.
♦ Our PSW7 charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp.
♦ It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.♦ LCD status display, battery/AC priority switch, USB communication port are available for our PSW7 pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting,and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
PSW7 Pure Sine wave Inverter/Charger Inverter Output Model AP AP AP AP AP AP AP 1000W 1500W 2000W 3000W 4000W 5000W 6000W Continuous Output Power 1000W 1500W 2000W 3000W 4000W 5000W 6000W Surge Rating(20s) 3000W 4500W 6000W 9000W 12000W 15000W 18000W Capable of Starting Electric Motor 1HP 1.5HP 2HP 3HP 4HP 5HP 6HP Output Waveform Pure Sine wave/Same as input(Bypass mode) Nominal Efficiency >88%(Peak) Line Mode Efficiency >95% Power Factor 0.9-1.0 Nominal Output Voltage rms 100-110-120Vac / 220-230-240Vac Output Voltage Regulation ±10% RMS Output Frequency 50/60Hz ± 0.3Hz Short Circuit Protection Yes, Current Limit Function (Fault after 1sec) Typical transfer Time 10ms(Max) THD < 10% DC Input Nominal Input Voltage 12.0Vdc ( *2 for 24Vdc, *4 for 48Vdc) Minimum Start Voltage 10.0Vdc Low Battery Alarm 10.5Vdc / 11.0Vdc Low Battery Trip 10.0Vdc / 10.5Vdc High Voltage Alarm & Fault 16.0Vdc High DC Input Recovery 15.5Vdc Low Battery voltage recover 13.0Vdc Idle Consumption-Search Mode < 25 W when Power Saver On Charge Input Voltage Range Wide: 90~135VAC / 164~243VAC; Narraw: 100~135VAC / 194~243VAC; Output Voltage Depends on battery type Charger Breaker Rating 10A 10A 10A 20A 20A 30A 30A Max Charge Rate 35A / 70-90A Max (Charger Current Control) Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc) Charger curve(4 stage constant current)4Step Digital Controlled Progressive Charge Battery types ( *2 for 24Vdc, *4 for 48Vdc) Battery type Fast Vdc Float Vdc Gel U.S.A 14 13.7 A.G.M 1 14.1 13.4 A.G.M 2 14.6 13.7 Sealed Lead Acid 14.4 13.6 Gel Euro 14.4 13.8 Open Lead Acid 14.8 13.3 Calcium 15.1 13.6 De-sulphation 15.5 for 4hrs Remote Control Yes. Optional Bypass & Protection Input Voltage Waveform Sine wave (Grid or Generator) Nominal Voltage 120Vac 230Vac Low Voltage Trip 80V/90V±4% 184V/154V±4% Low Voltage re engage 90V/100V±4% 194V/164V±4% High Voltage Trip 140V±4% 253V±4% High Voltage re engage 135V±4% 243V±4% Max Input AC Voltage 150VAC 270VAC Nominal Input Frequency 50Hz or 60Hz (Auto detect) Low Freq Trip 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Low Freq re engage 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz High Freq Trip 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz High Freq re engage 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Output Short circuit protection Circuit breaker Bypass breaker rating 10A 15A 20A 30A 30A 40A 40A Transfer switch rating 30amp for UL & TUV 40amp for UL Max bypass current 30amp 40amp Mechanical Specification Mounting Wall mount Inverter Dimensions(L*W*H) 382*218*179mm 442*218*179mm 598*218*179mm Inverter Weight 16KG 17KG 20KG 24KG 35KG 45KG 45KG Shipping Dimensions(L*W*H) 520*315*300mm 580*315*300mm 740*315*300mm Shipping Weight 18KG 19KG 22KG 26KG 37KG 47KG 47KG Display Status LEDs / Status LEDs+LCD Standard Warranty 1 Year Low Battery Trip Volt:
The Low Battery Trip Volt is set at 10.0VDC by default. It can be customized to 10.5VDC.
AC Input Range:
There are different acceptable AC input ranges for different kinds of loads.
It can be customized from 184-253VAC to 154-253VAC.
Load Sensing Cycle:
The inverter is factory defaulted to detect load for 250ms in every 30 seconds. This cycle can be customized
to 3 seconds thru the SW3 on DIP switch.
AC/Battery Priority:
Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be
charged first, and the inverter will transfer the input AC to power the load.
The AC Priority and Battery Priority switch is available upon request. When you choose battery priority, the
inverter will inverting from battery despite the AC input.
PSW7 APC APS APV APP HP Series Inverter&Charger Selection Guide

YueQing YIYEN Electric Technology Co., Ltd is a professional manufacturer on Voltage Stabilizer, Inverter and UPS.
- Located in Liushi, WenZhou, which is a capital of electrical in China;
- We have been in Power industry for more than 7 years;
- Good quality ,Reasonable price;
- Accepted Retail if we have product in stock;
- Accepted Wholesale,Brand Agents,OEM,ODM and Can be Customized;
- Accepted Payment Type: T/T, PayPal, Western Union;
